12
GB
5. Enter the minutes using
[
]
and
[
](CLOCK)
.
6. Press
[
ALARM
]
to exit. The
[
]
icon for the alarm
chosen will be displayed indicating the alarm set above is now
armed.
You can also arm or disarm an alarm by pressing the
[ ON / OFF ]
(CLOCK)
button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start off gently
and step up its intensity every 20 seconds for four times. Without
interruption, the alarm will go off for a total of two minutes. If no key
is pressed to turn off the alarm within these 2 minutes, the alarm will
go off once more after 8 minutes.
If a second alarm goes off when the first alarm is sounding off, the first
alarm will be disabled automatically.
HOW TO STOP AN ALARM
To stop an alarm, you can use either press
[
ALARM
]
button or
[ ON / OFF ] (CLOCK)
button.
Pressing
[
ALARM
]
will stop the alarm, which is still armed and
will activate at the set time the following day.
If
[ ON / OFF ] (CLOCK)
button is pressed instead, the alarm
will be stopped and deactivated all together.
NOTE ON °C AND °F
The temperature display designation of °C or °F on the main display
unit will override the display selection made on the remote sensor.
Whatever the display unit of the remote sensor is, it will only apply
to the remote sensor itself and the temperature unit will automati-
cally be converted to the one of the main unit. (i.e. °C)
MAINTENANCE
When handled properly, this unit is engineered to give you years
of satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
with water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials.
Abrasive cleaning agents may scratch the plastic parts and
corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
4. Do not tamper with the units internal components. Doing so
will terminate the units warranty and may cause damage. The
unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may leak.
6. Read this instruction manual thoroughly before operating the
unit.
