9
GB
Indicator
displays
on the unit
Temperature
Range
20°C to 25°C
(68°F to 77°F)
-5°C -+ 50°C
(23°F - 122°F)
-5°C -+ 50°C
(23°F - 122°F)
Humidity
Range
40%RH-
70%RH
OVER-
70%RH
Below
40%RH
Shows that the
Current
Environment
Ideal range for
both relative
humidity and
temperature
Contains excess
moisture.
Contains
inadequate
moisture
No
Indicator
Less than
20°C( 68°F)
or More than
25°C (77°F)
40%RH
to
70%RH
No comment
COMFORT
WET
DRY
HOW TO CHECK THE BAROMETRIC
PRESSURE
The current and historical barometric pressure is shown on the
atmospheric pressure window.
For use at a higher altitudes, such as in the mountains, sea-level
barometric pressure applies.
In this case, press and hold [HISTORY]
button to enter the altitude compensation setting mode. Use the UP
(+) or DOWN (-) button to select from –100 to 2500 meters
(whichever appropriate). Press [HISTORY] button to confirm and
exit.
The atmospheric pressure can be displayed in mb/hPa or inHg. The
pressure unit is selected on the atmospheric pressure slide switch
inside the battery compartment.
If you want to check the pressure history for a particular hour
during the past 24 hours, press the [HISTORY] button. Each press
on the button will go back by an hour. Holding down the button
will increase the value rapidly.
LOW BATTERY INDICATION
When it is time to replace batteries, the respective low battery
indicator [
] will show up when the corresponding channel is
selected. The battery level of the main unit is shown on the Weather
Forecast Window when it is running low.
HOW TO WALL MOUNT OR USE THE
TABLE STAND (REMOTE UNIT)
The unit can be wall-mounted using its recessed screw holes or
place on a flat surface using the fold out table stand.
Wall-mount Table stand
913hg-e.p65
04/30/2002, 6:00 PM
9
