12
GB
Refer to fig 18 to display such information and fig 18a to clear the
memory.
Note:
please refer to Section 7 for overall erase of memory record.
SECTION 7 ADDITIONAL
INFORMATION
This section applies to all models.
KEY LOCK
The OUTBREAKER is equipped with a key lock function to avoid
accidental pressing of any key during the activities. To activate the
function, simply press and hold SELECT. Press and hold the
SELECT again to release the key lock function.
Refer to fig 19. It shows the LCD display in various modes when the
key lock function is activated.
TOUR MODE
The tour mode retains tour memory for the ALTIMETER,
BAROMETER, HEART RATE and BIKE operating modes.
To activate the tour mode, hold MODE and FUNCTION
simultaneously in any of the above operating modes. The tour
number and total memory used will be displayed. Press and hold
FUNCTION to disable or enable the tour function. You can
temporarily stop the recording during a rest on the tour.
Refer to Fig 20 for the operation.
Note:
a) After disabling a tour function, a new tour memory will be started
when the function is activated again.
b) Tour memory can be retreived only through the PC.
c) Tour memory can be erased only by the PC software.
d) Information recorded during the tour such as temperature, altitude,
heart rate, wheel speed, cadence, trip distance etc. can be selected
through the PC software.
MARKER
The marker function is used to mark a particular position of a tour.
To use the marker, press and hold MARKER when the tour mode is
in place.
Note:
The marker can only be observed after downloading the tour data on
the PC.
