2
BEFORE OPERATING CLEANER,
READ ALL INSTRUCTIONS IN
THIS MANUAL CAREFULLY.
Table of Contents
Maintenance and Customer Service, Accessories, Caution,
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . page
2
Grounding Instructions, Warranty . . . . . . . . . . . . . . . . . . . . . page
3
Operating Instructions, Troubleshooting Guide . . . . . . . . . . . page
4
Maintenance and Customer Service
Your Oreck Low Boy is a product of precise engineering. The motor
bearings are permanently lubricated and should not be oiled. If you
require additional information or have problems with your Oreck
appliance, you may call ORECK customer service at:
0800 67 68 69
Please specify the model number and serial/code number which can be
found on the data plate on the back of the vacuum.
Save your sales or purchase slip. Should your Oreck appliance require
warranty service in the U.S.A., present this slip to the Authorized Service
Center as your proof of purchase date or, in Canada, call customer
service.
Accessories
ITEM
PART #
1. Green Bristle Holder: included with machine.
53304-01
2.
Drive Pad Holder
53269-51-0327
3. Scrub Brush: Hard Surface cleaning.
82001
4. NY/LO Grit
82003
5. Carpet Bonnet
82008
6. Lambs Wool Bonnet
82009
7. Pad, Black
82004
8. Pad, White
82005
9. Pad, Brown
82006
CAUTION
This appliance must be connected to a grounded metal, permanent
wiring system; or an equipment-grounding conductor must be run with
the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
ALWAYS UNPLUG THE MACHINE BEFORE INSTALLING OR
REMOVING ACCESSORIES. ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
When using an electrical appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS FLOOR MACHINE
WARNING
To reduce the risk of fire,
electric shock, or injury:
IMPORTANT SAFETY
INSTRUCTIONS
• Use indoors only.
• Risk of explosion - Floor sanding can result in an
explosive mixture of fine dust and air. Use floor sanding
machine only in well ventilated area.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Do not leave appliance unattended when plugged in.
Unplug from outlet when not in use and before servicing.
• Use only as described in this manual. Use only manufac-
turer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center or call customer service at:
0800 67 68 69
• Do not pull or carry by cord, use cord as a handle, close
door on cord, or pull cord around sharp edges or corners.
Keep cord away from heated surfaces.
• Do not run appliance over cord.
• Use extra care when cleaning on stairs.
• Connect to a properly grounded outlet only. See
grounding instructions.
• Unplug before installing or removing pads/cleaning
brushes.
• Warning - To reduce the risk of fire, use only commer-
cially available floor cleaners and waxes intended for
machine application.
• Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair and anything
that may reduce air flow.
• Keep hair, loose clothing, fingers and all parts of body
away from openings and moving parts.
• Turn off all controls before unplugging.
• Do not use appliance in an enclosed space where
flammable, explosive or toxic vapors are given off by oil
base paint, paint thinner, some mothproofing substances,
or in an area where flammable dust is present.
• Only use the brushes provided with the appliance or
those specified in the instruction manual. The use of other
brushes may impair safety.
• The appliance is suitable for commercial use, for example
in hotels, schools, hospitals, factories, shops, offices and
rental businesses.
SAVE THESE INSTRUCTIONS
