6
A double-insulated appliance is marked with one or
more of the following: The words “Double Insulation”
or “Double Insulated” or the double-insulation symbol
( ). In a double-insulated appliance, two systems of
insulation are provided instead of grounding. No
grounding means is provided on a double-insulated
appliance, nor should a means for grounding be
added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of
the system and should be done only by qualified
service personnel. Replacement parts for a double-
insulated appliance must be identical to the parts
they replace.
POLARIZATION INSTRUCTIONS
To reduce the risk of electric shock, the ORECK
STEEMER model is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
a polarized outlet only one way. This is a safety
feature. If you are unable to fit the plug fully into an
outlet, try reversing the plug. If the plug should still
fail to fit, contact a
qualified electrician to
replace the obsolete
outlet. Do not defeat the
purpose of the polarized
plug in any way.
S
ervicing of
D
ouble-
I
nsulated
A
ppliances
A.L.C.I
The ORECK STEEMER is made to double-insulated
specifications and is equipped with an A.L.C.I.
(Appliance Leakage Circuit Interrupter). The A.L.C.I.
shuts off the unit in potentially hazardous
situations. The A.L.C.I. has a Test and Reset button
which should be operated each time the unit is
plugged in. Do not remove the tag which provides
test instructions from around the cord at the A.L.C.I.
(A.L.C.I. may vary from illustration).
DANGER:
Improper installation of A.L.C.I.
can result in electric shock.
Do not modify or by-pass the A.L.C.I. Do not replace
any electrical component in this product with
anything other than an authorized ORECK
replacement part. The risk of electric shock can result
if used in the vicinity of improperly grounded
stationary appliances (stove, refrigerator, washer,
etc.).
Polarized Plug
Test Button
Reset Switch
Instructional Tag
DO NOT REMOVE
6
Lift Out and Lower
B
C
T
o
S
et-
U
p
C
leaner
STEP 1:
Swing the wheels
away from the nozzle into
the operating position.
Remove the two-tier tank
from the cleaner by
pinching the gray and red
latch together, and then
gently lowering the latch
toward the nozzle.
Do Not Force!
(Figure 5)
STEP 2:
Push the two-tier
tank downward toward
the nozzle and lift out
(Figure 6).
STEP 3:
To fill the supply
tank with clean water,
open the gray tank cap.
Fill the tank with lukewarm
tap water to the fill line,
as noted on the side of the
tank (Figure 7).
The ORECK STEEMER cleaner is designed for fast
and easy set-up:
CAUTION:
Do not overfill tank or use water that is
too hot to touch. Do not put any type of
shampoo/cleaner into the supply tank. Other carpet
shampoo will leave residues in the
cleaner
that will over a short period of time clog the
dispensing system and void your warranty. Use only
STEEMER Full Release™ Professional Carpet
Cleaner cartridges, which are specifically
formulated to be residue-free.
5
A
Pinch
Latch
7
Fill Line
STEP 4:
Close gray cap
and place the tank back
on the cleaner (Figure 8).
Lift the gray latch to slide
the tank upward into
position until you hear a
“click,” signaling that the
tank is securely locked
into place.
8
A
B
C
