background image

Your ORECK vacuum cleaner is a product of precise
engineering. The motor bearings are permanently
lubricated and should not be oiled. If you require
additional information or have problems with your
ORECK appliance, or to order new bags or spare
parts, you may call ORECK customer service at:

0845 603 0153

Or write to:

Oreck UK
P.O. Box 201
Exeter
DEVON
EX1 1XB
Attention: Oreck Customer Service

Please specify the model number and serial/code
number which can be found on the data plate on the
back of the vacuum. 

Save your sales or purchase slip. Should your
ORECK appliance require warranty service, present
this slip to the Authorized Service Center as your
proof of purchase date.

Maintenance and

Customer Service

Warranty

ORECK MANUFACTURING COMPANY: (Oreck 21180 Johnson Road;
Long Beach, MS, USA 39560 gives you the following warranty for this
product only if it was originally purchased for residential use, not resale
from Oreck or an Oreck Authorized Retail Dealer.)

Oreck will repair or replace, free of charge, to the original purchaser, any
part that is found to be defective in material or workmanship within 
three (3) years of date of purchase; ten (10) years on housing. This
warranty applies to normal domestic use. Any commercial use of this
product will void this warranty. This limited warranty covers the revolving
roller brush for one (1) year for residential use only.

This warranty does not cover the replacement of expendable or
consumable parts such as carbon motor brushes, edge brushes, belts,
bulbs, disposable bags and other parts subject to normal wear unless
they are defective in material or workmanship. 

This warranty does not apply to any part subjected to accident, abuse,
alteration, misuse, damage caused by act of God, the use of voltages
other than indicated on the serial number displayed on this product or
service of this product by other than Oreck or a participating Factory
Authorized Service Center.

Oreck does not authorize any person or representative to assume or
grant any other warranty obligation with the sale of this product.

Oreck’s warranty is valid only if you retain proof of purchase from Oreck
or an Oreck Authorized Retail Dealer for this product. If you purchase this
product from any other source, your purchase is “AS IS,” which means
Oreck grants you no warranty, and that you, not Oreck, assume the entire
risk of the quality and performance of this product, including the entire
cost of any necessary servicing or repairs of any defects.

This warranty is in addition to your statutory and other legal rights.

*Reconditioned units carry a 1 year warranty from date of purchase.

A

CCESSORIES

ITEM

PART NUMBER

1.

Dust Bag, 8 Pack, Saniseal

®

Hypo-Allergenic

CCPK8DW

Dust Bag, 8 Pack, Regular

CCPK8

2.

Belts, 3 Pack

0300604

3.

Oreck Fresh Air

®

Tabs

AIRTABS

4.

Light Bulb

00965-0019

3

 

 

 

 

 

 

 

 

 

 

Содержание 2635RH









Отзывы: