The Display Settings menu item enables you to
configure the following settings:
•
Brightness Timeout (seconds): Enables you
to set the number of seconds before the
display brightness is dimmed. A shorter
timeout period saves battery power when the
device is in operation.
•
Power Off (seconds): Enables you to set the
number of seconds before the display
switches off, if device is unused. A shorter
timeout period saves battery power when the
device is in operation.
•
Brightness at minimal ambient light (%):
Enables you to set the display brightness.
−
Logging
Use Logging On/Off to enable/disable the unit's logging function.
−
Set Mark
Use Set Marker to set a marker on the unit.
•
Test
The Test menu item enables you to test the LEDs in the status bar, the
display, the touch screen, and the tilt sensor to ensure proper function; it
also allows you to run a ping test.
Ping tests only work if the device is in the service station and LAN
connectivity is established.
On Sol+ you can test the belt printer – and Ordercard functionality.
•
About
This item displays information about the unit's hardware and software, as well
as its serial number.
•
(Connect Belt Printer) Sol+ only
5.2.
Message status bar
The Message icon provides access to internal messaging systems and allows
you to create and read messages.