Orcon HRC-300-EcoMax Скачать руководство пользователя страница 12

12

1.  Remove the filter handles, this may require some force.
2.  Remove the contaminated filters from the device using the pull tab. 
3.  Vacuum clean the filters on the outside. If the filters are too dirty, they must be 

replaced. Order original Orcon filters to guarantee a good performance of the unit 
(www.orcon.nl/winkel). 
• 

Coarse 45% filter: Wire-frame filter, filters 45% of all particles (0.97-176μm) 
from the air 

• 

Coarse 65% filter: Pleated filter: large filter surface, filters 65% of all particles 
(0.97-176μm) from the air

• 

ePM1 70% filter: Pleated filter: large filter surface, filters 70% of all particles 
(0.3-1μm) such as pollen and fine dust from the air. To be used as a supply 
filter.

4.  Reinstall the cleaned filters. 

Caution:

 Reinstall the filters on the same side as they 

were before cleaning. If you have pleated filters (HRC-MaxComfort), an icon will 
indicate on which side they should be placed, these icons can also be found on 
the top of the unit.

5.  Replace the filter handles in the recess on the front of the unit. On the inside of 

the covers you will see an 'L' or 'R' marking to indicate on which side the covers 
should be. Press the filter handles firmly over the entire front surface to ensure 
that they are fully attached.

6.  Return the plug back to the socket.
7.  Press the button next to 'FILTER' on the display for 3 seconds to reset the filter 

timer. Or do this on the remote control by pressing <AUTO> and <TIMER>  
simultaneously for 

3

 

seconds

.

Filter sets

Article

Item no.

Filter set HRC EcoMax 2x coarse 45% 

22700002

Filter set HRC MaxComfort coarse 65% & ePM1 70%

22700006 

Filter set HRC EcoMax 2x Coarse 65% 

22700009

Clean valves

Take the valve by the outer edge and remove it from the wall or ceiling. The valves can 
be cleaned with soapy water. Then rinse the valve thoroughly and dry it. Replace the 
valve in the wall or ceiling.

Take care:

 that the setting for the valves is not changed and that the valves are not 

interchanged. If these are interchanged, the system will no longer function optimally!

Содержание HRC-300-EcoMax





















Отзывы: