Orchid PBX206 Office Solution Скачать руководство пользователя страница 2

2

Locate your PBX system near to a mains power supply 
and the incoming BT Line sockets.

Step One:

Using the black connector leads connect the PBX206 
to your incoming BT/Cable line sockets. 

Step Two:

LINE1

1

2

3

4

5

6

LINE2 LINE3

If you are only using one line please see the quick start 
guide below or refer to page 3 of the full user guide.

Plug in the mains power lead and switch on. 
Red Power light will flash slowly.

Содержание PBX206 Office Solution

Страница 1: ...the PBX206 Office Solution Contents 1 x PBX206 2 x Black Line Connector Leads 4 x DX800 Telephones 2 x 5cm White Extension Connecting Cables 2 x 5M White Extension Connecting Cables 2x 10M White Extension Connecting Cables 50 x Cable Clips ...

Страница 2: ...black connector leads connect the PBX206 to your incoming BT Cable line sockets Step Two LINE1 1 2 3 4 5 6 LINE2 LINE3 If you are only using one line please see the quick start guide below or refer to page 3 of the full user guide Plug in the mains power lead and switch on Red Power light will flash slowly ...

Страница 3: ...of the PBX and your phone lead into the other end of the connecting cable Now secure the lose cables to skirting boards using the cable clips provided to ensure that they do not create a safety hazard Step Four LINE1 1 2 3 4 5 6 LINE2 LINE3 To connect the extensions to the PBX system use the 5M or 10M extension connecting cables provided depending on how far away you want the telephones from the s...

Страница 4: ...requirements see the following examples Example 1 For incoming calls on line 1 to only ring on extensions 1 2 3 and 4 Lift Handset Dial 1 1 1 2 3 4 Replace Handset Code Line Extensions End Example 2 For incoming calls on line 2 to only ring on extensions 1 5 and 6 Lift Handset Dial 1 2 1 5 6 Replace Handset Code Line Extensions End Important Note One or Two Exchange Lines The PBX 206 is configured...

Отзывы: