20
To select a specific line on a “Call By Call” basis
The Extension can either be in “Dial 9 for a Line” Mode or Direct Dial Mode.
Lift Handset & Dial:
# 1
(For Line 1)
# 2
(For Line 2)
# 3
(For Line 3)
When in Direct Dial Mode, please remember to add a * in front of the above examples.
* # 1
(For Line 1)
for example
Power Failure
In the event of a power failure the exchange lines will automatically be extended as follows:
Line 1 to 201
Line 2 to 202
Line 3 to 203
This is a useful feature if a company has several offices, it enables the Administrator to program
Key System features including Speed Dial memories, remotely. It also enables your Key System
provider to assist you in setting up the system.
To program the system remotely call the Key System and get transferred to Extension 21, the
person on Extension 201 should be instructed to Dial
RECALL (R)
then
# * # *
.
You can now program the System as required, NO NEED to dial the system password before
programming.
Alternatively the person on 201 of the system that needs programming can call you, Dial
RECALL
(R)
followed by
# * # *
both parties should hang up when programming is completed.