background image

 

 

 

 

MUTE BUTTON 

 

The mute button blocks the microphone transmission to the caller but can only be used 

when the LCD (large green Caller Display) goes out, which is about 6 seconds after 

making or receiving a call. 

 

SMS 

 

The SMS service enables you to send SMS messages to other Extensions with 

Key phones. To write and send a message press the SMS button and scroll using the 

navigator wheel to EDIT MESSAGE and press to confirm. Using the Alphanumeric Dial 

keys write the message and press to confirm when finished. Extn No is now displayed , 
enter the Extension number and press to confirm. Wait until "Finished" is displayed.  

The SMS message has now been sent and the Key-phone receiving 

the message will hear a message received signal for 8 seconds, then the LCD 

will flash and " press SMS to view" will be displayed. 

To read an SMS message press the SMS button and then press the navigator wheel to 

confirm, when the message has been read press confirm again and "Delete message" 

will be displayed. Press confirm to Delete or press the RETURN button repeatedly until 

the time is displayed. 

 

PROGRAMMING OPTIONS  

Press the PROGRAM button for the following options: 

 
ALARM CLOCK 

To set the Alarm clock press the PROGRAM button and scroll to "Set time" and 

press confirm, now enter the time for the Alarm, a second time for an Alarm 

can also be entered. 

Scroll to "set period" and press confirm to set intervals for the Alarm. The 

options are once, every, Monday to Friday or Monday to Saturday. Now scroll 

to Alarm on/off to switch the Alarm on or off. 

 

DO NOT DISTURB 

To enter "Do not Disturb " mode press the PROGRAM button then scroll to Do 

not disturb and press OK. In this mode the LEDs will flash but the phone will not ring 

 

EXTENSION LOCK 

You can program the Key phone to prevent unauthorised use. In the LOCK mode 

only Internal calls can be made. 

To enter LOCK mode press the PROGRAM button and scroll to EXT LOCK and press 

confirm. Enter the 4 digit security code which is factory set to 1234. This 

can be changed to any 4 digits. 

 

WORK MODE 

There are 3 options NORMAL, CALL TRANSFER and AUTO HANDSFREE. 

 

Normal 

Содержание KP616








Отзывы: