OrcaVue Life, Руководство пользователя

Страница: 7 / 14

Version 2.3
Page 7
2. Camera Arm
2.1 Securing the Camera Arm Base
1. Unfold the camera arm by loosening the thumbscrew and pulling out the silver positioning pin at
the pivot point
(Figure 8).
2. The silver positioning pin is placed behind the arm and determines its angle. Place the pin in a
hole that corresponds to your desired position.
3. Allow the arm to rest against the silver pin and then firmly tighten the thumbscrew to hold arm in
a fixed position.
4. In Figure 9 , remove the thumbscrew of the square horizontal tube and slide Camera Arm onto
the silver square bar to attach arm to unit. Adjust to the desired length, reinsert thumbscrews
and tighten.
2.2 Camera Shoe Mount
5. Attach your desired camera to the removable camera shoe (Figures 10 & 11) by screwing the
bolt protruding from the shoe into the camera. Note: If you have a compatible mount that can be
clamped directly by the camera shoe holder, this step is unnecessary.
Figure 6
Figure 9
Figure 8
Figure 8
Silver Pin
Thumbscrew
Figure 9
Thumbscrew Hole