ORBOT Slim, Руководство по эксплуатации

Страница: 9 / 24

OPERATION
Unpacking
Open shipping box (both sides). Remove
packaging material and roll machine out of
the box.
Solution Tank
Disconnect the quick-connect fitting located
at the bottom of the solution tank. Remove
solution tank by pulling away from the handle
frame. Add water or cleaning detergent of
choice. Snap solution tank onto frame.
Reconnect the quick-connect fitting.
CAUTION
Ensure solution tank cap is securely fastened
to avoid leaks and spills.
Pads/Brushes
Choose an Orbot pad or brush of choice to
clean or restore the desired floor.
Place under the hook pad driver BEFORE
powering on machine.
To remove, simply peel off.
Power Switch
Turn power switch to the OFF position located
at the top of the handle. The power switch will
illuminate when powered ON.
Battery
Insert the battery into the battery tray located
inside the base housing cover.
Ensure to completely lock the battery into
position until you hear a click sound.
To remove the battery, release the battery
lever and pull out. You can use your right
hand to help push the battery out of the tray.
WARNING
Always remove battery and immediately
charge to avoid damage.
9