7
Internet Radio Requirements
In order to use the WiFi Internet radio, you will need the following:
1.
A broadband Internet connection.
2.
A wireless access point (Wi-Fi) connected to your broadband Internet, (usually referred to as a
router).
3.
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code. This is sometimes
written on the router device as (WEB Key or WPA key)
4.
If your wireless network is configured for trusted stations you will need to enter the Radio’s
MAC address into your wireless access point. To find the Radio’s MAC address use menu items as
follows: Main menu
System settings
Network
View settings
MAC Address
5.
To enter the MAC address into your wireless access point, you must read the instructions
supplied with the wireless access point.
6.
Before you continue, make sure that your wireless access point is powered up and
connected to your broadband Internet. To get this part of the system working you must
read the instructions supplied with the wireless access point.
