Orbitsound M12, Руководство пользователя

Страница: 15 / 23

13
Hint: You only need to re-pair a subwoofer if the STATUS light on it’s rear panel
is not showing solid red. I.e. if it is flashing, it is not currently paired with the
soundbar.
The M12 features a super low power state with wireless subwoofer low-power
control. When the soundbar enters standby mode, the power consumption
reduces. It is recommended that Users routinely use standby mode as this also
shuts down the wireless subwoofer.
When in standby mode, or if disconnected from the mains completely, the
soundbar will remember settings for pairing, bass, treble, volume and source
selection.
Note that the volume will be reduced if set very high when the unit restarts to
protect the listener.
Optical
Bluetooth
Aux
<HOLD>
You may wish to reset the soundbar settings. To do this, switch the unit on, then
press and hold the power button for a few seconds on the control panel. The
soundbar status light will flash, and then the soundbar will reset. Optical source
will be selected with default settings.