Orbitalum RPG 4.5, Руководство по эксплуатации

Страница: 25 / 32

(18.12.17) OC_RPG_L_BA_790038762_01_EN orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
| 25
RPG 4.5 (S), RPG 8.6 | Operating instructions Operation
ATTENTION
Restarting the machine following blockage!
Diverse physical injuries and material damage.
X
In the event of a blockage, always disconnect the machine from the power supply before clearing it.
X If necessary, remove any tensioned parts before restarting the machine.
ATTENTION
A tube that is not sawn off at right-angles can damage the tool (MFW) if the distance between the
cutting edge and the tube end is too small!
Tool breakage.
X
Before switching on the machine ensure that the tool has sufficient axial distance around the
complete tube circumference.
X
Only drive the rotating tool with limited feed to the tube.
X
General trouble shooting, see chap. 10.2, p. 28.
9.1 Shutting down (even in an emergency)
WARNING
EMERGENCY STOP function not available by unplugging the power plug!
Diverse physical injuries and material damage.
[
Do no t use angled power plugs.
[
Do not use click-in socket outlets and click-in power plugs (blue CEE power plugs) for power
connection, otherwise the EMERGENCY STOP does not function. The user must check whether
the power plug can be pulled out of the outlet by the cable.
X
Only use original Orbitalum Tools parts.
X
Ensure free access to the power plug.
To be able to stop the machine (also in case of emergency),
perform the corresponding steps and immediately remove
from the danger area, until the machine comes to a stop:
If the locking button (4) is not activated:
X
Release the ON/OFF switch (5).
If the locking button (4) is activated:
X Press and release the ON/OFF switch (5).
If the ON/OFF switch (5) does not function:
X
Unplug the power plug, or leave the danger zone as
quickly as possible and then unplug the power plug.
4
5