charged.
-After
charging,
the
appliance
should
be
disconnected from the mains and the power cord
should be unplugged from the socket(5).
-The appliance is equipped with a trimmer(6) to cut
beard, which is activated by the switch(7).
CLEANING AND PRESERVATION
-Before cleaning turn off the appliance and remove
the power cable from the socket
-After each shaving the blades chamber should be
empty. In order to do if you must open the
shaving head housing by pressing button(2)
and remove the blades fastening by gently
turning the knob(photo 1).In order to clean the
appliance the attached brush should be used.
-Chamber blades can be washed under running
water
-The whole appliance cannot be submersed in water
and other liquids
-Do not use any cleansing agents which are strong
and damage the surface
-Wipe the housing with a moistened cloth
In case of cleaning under the water the appliance
must be entirely dry before next use.
REPLANCEMENT OF STRAINERS AND
KNIVES
To replace the knives and strainers, follow the
step-by-step disassembly instructions as
described "CLEANING AND MAINTENANCE"
point.
Disassembly steps are illustrated in fig.2.
The knives and strainers are working components
and should be replaced systematically.
They are not covered by warranty.
