Orbit PP Series, Инструкция по установке и эксплуатации

Страница: 11 / 30

9
The pump speed / pressure settings must remain below the pumps maximum limitations.
Consult Franklin Electric if you are unsure.
If the pump has never been run, it may be necessary to crank the pump through one revolution manually
(with water/product present in the gland). This can be achieved by using an adjustable wrench fitted at the
drive shaft.
8. GUARDS
In accordance with the Health & Safety Act, all guards must be secured after installation,
maintenance or any adjustments have been made to the pump.
9. ROTATION
Do not run the pump in the incorrect direction, check pump nameplate on bearing housing
for correct running rotation.
The PP Range rotates in ONE DIRECTION ONLY (counter-clockwise facing the drive end), which results in
delivery on gland (D.O.G.). Incorrect rotation will unscrew the threaded flexshaft potentially causing
damage to both the rotor and flexshaft as well as terminating flow from the pump.
ORBIT PP AGRICULTURAL INSTALLATION AND OPERATIONS MANUAL