Orbit OBRPR5, Руководство пользователя

Страница: 13 / 13

H.R.C
If select H.R.C mode, need set age first and confirm by MODE. It will display preset value in PULSE area
according to age. If select TARGET, it will display 100 and flash in PULSE area. Use ▲ / ▼ to adjust the
target value(30~230) and can be recycle.
User Program
In User PROGRAM mode, user may press ▲ / ▼ to select program drawing
（
each timer shift corresponding
Level value), display and flash in the inserted drawing. It will light after setting. When setting, the figures
and Letters in LOAD Window displaying to be set. LOAD value flash at 1Hz. Press mode to confirm the
value after setting. A complete PROGRAM drawing timer shift has 20 steps need to be set. Then it will run
as the set program. When come to 9
th
step, it scroll and shift to lest and so on. If you want to pause the pro
-
gram halfway, press mode
2s. The unset timer shift will save last time value.
WATT
When entering, the WATT value is flashing to be set(preset value=120). User press ▲ / ▼ to set WATT value.
After Starting, it will adjust automatically according to the WATT value user inserted and exercise status.
SLEEP MODE
No signal(SENSOR, KEYBOARD, PULSE value display) input over 4 minutes, system will enter SLEEP
MODE. All set and calculated value will be saved. When power on and start next time, it will go on with the
calculated value.
FUNCTION
TIME Display range 0:00~99:99 ; Setting range 0:00~99:00
DISTANCE Display range 0.00~99.99 ; Setting range 0~99.90km
CALORIES Display range 0~9999 ; Setting range 0.00~9990
PULSE Display range P-30~230 ; Setting range 0-30~230
WATT Display range 0~999 ; Setting range 10~350
SPEED 0-99.9KM
RPM 0~999
INSPECTION FOR ABNORMAL CONDITION
LCD display E-2: Inspect the electronic watch and console 5PIN connecting cable for peeling off and
poor contact.
LCD no drawing:
1. Check whether the adapter is well inserted into the AC plug seat.
2. Check the adapter DC pin is plugged into the machine or not, whether contact poorly.
3. Check the electronic watch and console 12 PIN connecting cable for peeling off and poor contact.
4. Check DC JACK connecting cable is loose or not.
5. Check the internal 12PIN connecting cable of the electronic watch is loose or not.