background image

 

 

IMPORTANT SAFETY NOTICE 

Note the following precautions before assembling or operating the 

machine. 

01. Assemble the machine exactly as the descriptions in the instruction manual. 

02. Check all the screws, nuts and other connections before using the machine, only do 

exercise

 

on the machine when it is in 

proper working condition

. Ensure that all users are adequately 

informed of all precautions. 

03. Set up the machine in a dry level place and 

keep

 it away from moisture and water; before 

beginning 

exercise

, remove all objects within a radius of 2 meters from the machine. 

04. Place a suitable 

support

 (e.g. rubber mat, wooden board etc.) beneath the machine in the area 

of assembly 

and

 exercise to avoid scratch, dirt and etc. 

05. Do not use aggressive cleaning articles to clean the machine, remove drops of sweat from the 

machine immediately after finishing exercising.   

06. Only use the supplied tools or suitable tools of your own to assemble the machine or repair any 

parts of machine, use only 

genuine

 spare parts for any necessary repairs. 

07. Your health can be affected by incorrect or excessive exercising. Before beginning this or any 

exercise program, consult your doctor. This is especially important for people over the age of 

35 or those with pre-existing health problems. 

08. This machine is intended for home use only, not suitable for therapeutic purpose. 

09. Wear appropriate clothes and athletic shoes when exercising. 

10. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop 

immediately and consult your doctor. 

11. The maximum user’s weight is 

100KGS

 

 
 
 
 

 
 

Содержание OBK 794













Отзывы: