14
HELP
www .orbitonline .com
Orbit
®
Technical Service: 1-800-488-6156
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
One or more lights on one
station do not turn on .
1 . Faulty wire connection at light .
Verify that light wire is connected to power
supply wire correctly (see page 7) and that it is
not wet . Note: Disconnect from power source
before touching any unprotected wire .
2 . Faulty or damaged light .
Verify that the light is in good working condition .
Light stations turn
on when they are not
supposed to .
1 . Programming is incorrect .
Check that Start Times, Clock, and Days of Week
are programmed correctly .
2 . Time of day is incorrect .
Verify that the time of day has been set correctly .
3 . Photocell is set incorrectly .
See page 11 for proper instructions on
programming the photocell .
One station is stuck on
and will not shut off .
1 . Programming is incorrect .
Check that Stop Times, Clock, and Days of Week
are programmed correctly .
2 . Photocell is set incorrectly .
See page 10 for proper instructions on
programming the photocell .
Controller will not
power up .
1 . Controller/transformer is not plugged in .
Plug controller/transformer into a working
outlet or connect to power source .
2 . Controller/transformer is not plugged into
a working outlet .
Verify that the outlet being used has power .
Troubleshooting (Continued)
