DripMaster
8
9
DripMaster
®
FOR POTTED PLANTS
4
Attach Multi-Stream Drippers
to each ¼" Distribution/Supply Line
and insert stake next to each plant.
5
Remove the ½" End Cap and turn
on water to flush system; replace cap.
6
Adjust water flow by twisting the
top of the Multi-Stream Dripper.
FOR HANGING PLANTS
4
Attach Adjustable Flow Mist
Sprayers to each ¼"
Distribution/Supply Line and aim
sprayer into the hanging basket.
5
Continue running lines to each
hanging basket until the system is
completed.
6
Remove the ½" End Cap and turn
on water to flush system; replace cap.
7
Rotate the flow control knob on
the Mist Sprayer to adjust flow rate.
IMPORTANT: The maximum
recommended number of Multi-Stream
Drippers and Mist Sprayers per ½"
supply line is 15.
Supplies needed
- ½" Tube Straps (part # 65716 or 66716)
- ¼" Tube Straps (part # 65715 or 66715)
- ¼" Distribution/Supply Tube (part # 67300, 67301, or 67303)
- ¼" Barbed Couplers (part # 66402 or 67402) or the ¼" Barbed Assortment
Pack (part # 66431 or 67431)
- Stake with Multi-Stream Dripper (part # 66105, 67105 or 68105)
- Adjustable Flow Mist Sprayer (part # 66190 or 67191)
- Punch Tool (part # 61285 or 67756 )
SECTION
4
POTTED / HANGING PLANTS
Note: Steps 1–3 apply to both potted & hanging plants
1
Distribution/Supply Line
—Place the ½" Distribution/Supply Line close
to your Potted or Hanging Plants. Use ½" Tube Straps to secure the Tube and
install a ½" End Cap.
2
Hole Punch
—Punch holes in
the ½" Distribution/Supply Line for
each container or hanging basket.
Next, insert ¼" Barbed Couplers
into each hole.
3
Connect ¼" Distribution/Supply
Line to each exposed Barbed Coupler
and run the Distribution/Supply Line
to each container/basket. Use ¼" Tube
Straps to hold in place.
IMPORTANT: A single ¼"
Distribution/Supply Line should not
exceed 30'.
Common Hose Faucet Projects
2
3
4
6
4
7
To Hose Faucet
To Hose Faucet
1/2" Tube Straps
To Hose Faucet
To Hose Faucet
Tube Straps 1/2"
Orbit
®
DripMaster
®
|
Installation Guide
Orbit
®
DripMaster
®
|
Installation Guide
