4” & 6” Termination (duct)
Rough Opening:
11-1/4” L X 10-1/2” W
Housing Dimension:
11-1/4” L X 10-1/2” W X 7-5/8” H
Carefully position fan
for shortest duct run and
fewest elbows to achieve
maximum performance
1. Remove grille from housing before installation.
2. Insert pair of sliding brackets in each bracket mount.
3. Locate housing between ceiling joists and truss so bottom
flange will fit flush to the ceiling joist.
4. Loosely screw to joist through the mounting bracket
KEYHOLE slots (screws not provided).
5. Optional side mount to ceiling joist and use one side of the
bracket for more stable support.
1. For new fan installation position the housing in the
attic next to the ceiling joist or truss.
2. Trace housing bottom edge on ceiling material for cutout.
3. Confirm the opening, then cut hole 11-1/4” X 10-1/2” of the
housing inside edge.
4. Place housing inside opening (attic) of the ceiling.
5. To attach follow steps 3, 4, 5 for New Construction.
Deluxe
ODU814M
