PN 58910-24 rA
NOTE:
1 is every day, 2 is every other day, etc.
4. Turn dial to save changes.
Congratulations! Your timer is now programmed.
Turn your dial to AUTO to allow your timer to
water according to programmed time, station,
duration, and frequency.
ADDITIONAL FEATURES
RAIN DELAy
Rain delay allows you to postpone watering for a
set period of time. To access the rain delay, follow
the steps below.
1. With the dial on AUTO, press the + button
to select a delay of 24 hrs, 48 hrs, or 72 hrs.
2. Screen will flash between clock and
hours remaining before programmed
cycle resumes.
3. To remove rain delay, turn dial to OFF
and then back to AUTO.
HRS
DELAY
MANUAL/HAND WATERING
This feature allows you to water without
interrupting your set schedule. To access this
feature, follow the steps below.
1. With the dial on AUTO, press the
MANUAL button.
2. Select the station you would like to
program by pressing the STATION button.
3.Use the + and – buttons to select watering
time, from 1 to 240 minutes.
NOTE:
There may be a slight delay between the
time the manual button is pressed and when
watering begins.
To stop manual watering, turn the dial to OFF.
Turn the dial back to AUTO to resume your
programmed watering schedule.
TROUBLESHOOTING
WATER DOES NOT COME ON AT DESIRED TIME
.
CHECK IF:
• Clock is set to correct time, including
AM and PM.
• Start time is set to desired time, including
AM and PM.
• Rain Delay is on.
TIMER DOES NOT WATER.
CHECK IF:
• Timer is set to AUTO.
• Hose faucet is on.
• Batteries are low.
• Clock is set to correct time, including
AM and PM.
• Rain Delay is on.
WATER WON’T TURN OFF.
CHECK IF:
• HOW LONG is set to desired time.
• Start times begin after previous watering cycle
has run through all stations and set durations.
MINS
MANUAL
© 2013 Orbit Irrigation Products, Inc.
All rights reserved. All trade names are
registered trademarks of respective
manufacturers listed.
Orbit
®
Irrigation Products, Inc.
North Salt Lake, UT 84054
