The manual outlet of the timer gives access
to the hose faucet without interrupting the
programmed cycle of the digital port.
1. Open the valve in the port by pulling the lever
away from the timer (see drawing)
2. Close the valve by pushing the lever towards
the timer (See drawing)
PROGRAMMING THE TIMED OUTLET
NOTE:
This section only relates to the timed outlet. The
manual outlet cannot be programmed.
SET CLOCK
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM.
3. Turn dial to save changes.
START TIME
1. Turn dial to START TIME.
2. Using the +/- buttons, set your start time,
including AM and PM.
3. Turn dial to save changes
DIAL
—Rotate the dial to customize your
watering schedule
RESET
—Press to clear all programming
MANUAL/CLEAR
—Press to water manually or to
clear programming within a specific program
+/- BUTTONS
—Use these buttons to adjust time
and system setup
WATERING TIMER
TIMER FEATURES
AUTO
—Timer waters according to your
customized schedule
SET CLOCK
—Set the time of day
START TIME
—Select what time you would like
watering to start
HOW LONG
—Determine how long to water
HOW OFTEN
—Choose how often you will water
OFF
—Turn off all watering
QUICK START
INSTALLING THE BATTERIES
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AA (1.5V) alkaline batteries
(included) and replace the tray.
WHEN EXPECTING FREEZING TEMPERATURES,
TIMERS SHOULD BE REMOVED FROM THE
HOSE FAUCET AND STORED INDOORS TO AVOID
POTENTIAL FREEZE DAMAGE.
ITM. / ART. 470228
CARE & USE INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
FILTER TRAPS DIRT PARTICLES,
PROLONGING LIFE OF TIMER. CLEAN FILTER
REGULARLY BY REMOVING IT FROM THE
HOSE TAP CONNECTION USING YOUR THUMB
AND RUNNING THROUGH COLD WATER. IF
WORN, REPLACE WITH A NEW FILTER FROM
YOUR NEAREST HARDWARE STORE.
HOSE TAP
CONNECTION
+/-
BUTTONS
MANUAL/
CLEAR
MANUAL
LEVER
FILTER
DIAL
RESET
CAUTIONS
BATTERIES INSTRUCTIONS
• Always purchase the correct size and grade of
battery most suitable for the intended use.
• Always replace the whole set of batteries at one
time, taking care not to mix old and new ones, or
batteries of different types.
• Clean the battery contacts and also those of the
device prior to battery installation.
• Ensure the batteries are installed correctly with
regard to polarity (+ and -).
• Remove batteries from equipment which is not
to be used for an extended period of time.
• Remove used batteries promptly.
For recycling and disposal of batteries to protect
the environment, please check the internet or your
local phone directory for local recycling centers
and / or follow local government regulations.
MANUAL OUTLET
Lever closed
Lever open
AM
AM
MANUAL
OUTLET
TIMED
OUTLET
AM
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit
®
, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
0000
∙
∙
∙
∙
Orbit
®
1.801.299.5555
orbitonline.com
Glue
Folded
Flat
Additional Information
PRINTERS ARE
REQUIRED TO MATCH
ALL SPECIFIED
PMS COLORS.
K
DATE: 09/1/2015
DESIGNER: NK MARKETING: SW
SOFTWARE: Adobe Indesign CS6
ARTWORK №: 56865-24E rA
L:
W:
H:
000.000"
W:
H:
3.0"
3.0"
12.0"
6.0"
