Orbit Fitness MAX1, Руководство пользователя

Страница: 14 / 17

- 13 -
ASSEMBLY INSTRUCTIONS
STEP 8
1.Start with Upper Cable (76)
a). With Upper Cable (76) in groove of Pulley (49), thread Upper Cable (76) through Upper
Cross Beam (3).
b). Install Pulley NO.1 (49) to Upper Cross Beam (3), using one M10X40mm Hex Bolt (88),
two M10 Washers (97) and one M10 Nylon Nut (101).
c). Install Pulley NO.2 & NO.4 (49) to Support Frame (4), using two M10X40mm Hex Bolts
(88),four M10 Washers (97) and two M10 Nylon Nuts (101).
d). Install Pulley NO.3 & NO.5 (49), four Steel Bushings (
￠16X￠11
) (25) and Pulley Cover
(26) to between of Left and Right Connect Frames (11&12) , using two M10X230mm Hex
Bolt (80),four M10 Washers (97) and four M10 Nylon Nuts (101).
e). Install Pulley NO.6 (49) to Support Frame (4), using one M10X40mm Hex Bolt (88), two
M10 Washers (97) and one M10 Nylon Nut (101).
f).Install Pulley NO.7 (49) to Support Frame (4), using one M10X40mm Hex Bolt (88), two
M10 Washers (97) and one M10 Nylon Nut (101).
g). Install Pulley NO.8 (49) to Pulley Patches (28), using one M10X40mm Hex Bolt (88), two
M10 Washers (97) and one M10 Nylon Nut (101).
h). Attach the bolt end of Upper Cable (76) to Select Shaft (22) with Plastic Washer (54).
i).Install Pulley NO.9 (49) to Upper Cross Beam (3), using one M10X40mm Hex Bolt (88),
two M10 Washers (97) and one M10 Nylon Nut (101).
j).Attach Lat Bar (24) to the other end of Upper Cable (76), using one Chain (short) (41) and
two Pothooks (48).
2.Assembly Lower Cable (75)
a). With Lower Cable (75) in groove of Pulley (49) through Leg Extension Frame (7).
b). Install Pulley NO.10 (49) and two Plastic Bushing (short) (71) to Leg Extension Frame
(7), using one M10X65mm Hex Bolt (86), two M10 Washers (97) and one M10 Nylon Nut
(101).
c). Install Pulley NO.11 (49) and two Plastic Bushing (long) (33) to Front Support Frame (8),
using one M10X70mm Hex Bolt (85), two M10 Washers (97) and one M10 Nylon Nut
(101).
d). Install Pulley NO.12 (49) to Base Frame (2), using one M10X40mm Hex Bolt (88), two
M10 Washers (97) and one M10 Nylon Nut (101).
e). Install Pulley NO.13 (49) to Arm Bracket (14), using one M10X40mm Hex Bolt (88), two
M10 Washers (97) and one M10 Nylon Nut (101).
f). Install Pulley NO.14 (49) to Pulley Patches (28), using one M10X40mm Hex Bolt (88),
two M10 Washers (97) and one M10 Nylon Nut (101).
g). Attach the end of Lower Cable (75) to Single Pulley U (29), using one M8X25mm Hex
Bolt (93), two M8 Washers (98) and one M8 Nylon Nut (102).
h). Attach Lower Bar (23) or Ankle Strap (34) to the other end of Lower Cable (75), using
one Chain (long) (42) and two Pothooks (48).