16
15 HANDHELD CALIBRATOR – MULTIMETER OC502-V2-100
√
Current Calibrator 0/4 - 110mA, Source
√
Voltage Calibrator 0-11V
√
Multimeter ± 2V to ± 200V DC and ± 100mA
√
Calibrates and Measures simultaneously
√
Firm steps and continuous ramps
√
Direct value entry via the keyboard
√
Rechargeable Battery
√
Software calibration
Orbit Controls Model OC 502-V2-100 is a Calibrator-Multimeter for
generation of 0/4 - 110mA in Source and Sink mode and Voltages
between 0 to 11V. External voltages ± 2V, ± 20V and ± 200VDC (firm
ranges or Autoranging) and currents up to ±100mA can be measured
while the calibrator generates the selected output signal. Due to this
simultaneous operation a response from e.g. an external transmitter
under test can be measured which is signal supplied from OC502-V2-
100. Both, the generated calibration signal and the measured external
signal are shown at the LCD digital display
OC502-V2-100 can be software calibrated via the keyboard whenever
required.
The instrument is supplied from internal battery and permits an uninterrupted operation of 3-4 hours with
the output current between 0 and 20mA. For higher output currents up to 100mA the calibrator has to be
connected to the charger. When the display shows BAT of the battery capacity, the calibrator has to be
connected to the charger.
SPECIFICATIONS
CALIBRATOR OC502-V2-100
Outputs + OUT -
Current Source
Range
0 ... 110mA
Accuracy
± 0.1% from range
Voltage Source
Range
0 ... 11 V
Accuracy
± 0.1% from range
Tempco:
±
25ppm/K
Temperature:
Working:
+20 ºC ... +25 ºC
Storing:
0 ... 45 ºC
The remaining parameters, menu steps and settings are identical with
the standard model OC502-t without generation of mV-Signals
and simulation of thermocouples.
Содержание OC502-t
Страница 2: ...2 ...
