Orbit baby G3, Инструкция по эксплуатации

Страница: 26 / 122

26 -
Instruction Manual - Car Seat + Isofix Base
Group 0+
Releasing or removing the harness
□
Loosen the harness by pressing and holding the adjuster strap lock, while pulling out
on the shoulder straps.
□
Release the tongues by pressing the red button on the crotch buckle.
⚠
WARNING
⚠
Death or Serious Injury Can Occur
•
The car seat must always be locked in the car seat base in the rear-facing position
when the vehicle is in motion.
•
Make sure the top of the car seat base and SmartHub are clear of objects and/or
dirt before attaching the car seat. Objects and/or dirt on the top of the car seat
base can lead to an improper installation.
Attach and secure the car seat
□
Grasp the car seat firmly by both carry handles
Ⓜ
. Position the bottom of the car
seat into the SmartHub
Ⓕ
until you hear and feel a CLICK.
□
Once the car seat is attached into the SmartHub, rotate the car seat until you hear
and feel another CLICK as it locks into the rear-facing position. Tug on the seat from
side to side and pulling upwards a few times to ensure that the car seat is locked
into place.
CHECK that the car seat is locked in position by looking at the rotation indicators
Ⓙ
on either side of the car seat base. If either indicator shows red, the car seat is
not locked rear-facing. Re-attach the car seat.