Orbis Viaris Uni, Руководство пользователя, Страница: 67 / 70

67
TECHNICAL CHARACTERISTICS
Feeding
|
Nominal frequency | Depending on characteristics label
Power |
Single phase Three-phase
Off load 4 W 4 W
Load function 7 W 14W
Charging modes (depending on model) Modes 1 and 2 according to EN 61851-1
(Schuko)
Mode 3 according to EN 61851-1
Connector cable Type 2. Load mode 3: according to EN 62196-2
Communication Wi-Fi802.11 b/g/n
Closing of the enclosure with screws
Protection class Case II. Insulating envelope
Degree of protection IP54 according to EN 60529
Degree of mechanical protection IK10 according to EN 62262
RCD-DD protection. 6 mA
Activation / Stop modes Touch or RFID configurable by App.
Type of terminals without screws
Peeling length 12 mm
Operating temperature -30 °C to + 50 °C
EXTRAS
VIARIS UNI chargers can incorporate, depending on the model:
 Base Schuko
Charging modes 1 and 2 (N/A in UK)

Single Phase / 3 Phase energy meter
Certified according to the MID Directive (2004/22/EC) According to EN 50470-3
 Ethernet communication
For installations requiring Ethernet communication.
The configuration is done by accessing the web platform of the charger.
You must choose between DHCP (dynamic IP assignment) or IPStatic, where
you will have to fill in the ethernet network data (IP, MAC, Gateway, Subnet
Mask, DNS Server) provided by the person responsible for it.

Communication 4G
Wireless communication can be installed using a Wi-Fi USB Dongle.
It is a requirement that you configure in the USB dongle an access point with
SSID: ORB_VIARIS_4G and PASSWORD: ORB1234$, in addition to setting
up the APN depending on the operator providing you with the SIM card.