Unlocking the detector
To unlock the detector from the base, insert a 1.5mm hexagonal driver (part
no 29600-095) into the small hole on the detector face and gently lever the
driver outward whilst rotating the detector anti-clockwise.
TimeSaver Diode Base/TimeSaver Diode Base LX
Fire detection systems that function normally even if a detector head has
been removed usually require a diode to be fi tted to the positive connec-
tions of the mounting base.
The TimeSaver base fi tted with a diode is marked with ‘OD’ and the Time-
Saver Diode Base LX is marked with ‘DX’ to distinguish them from standard
bases. The diode is factory-fi tted at the back of the base between the IN+
and OUT+ terminals.
Unlocking the detector
To unlock the detector from the base, insert a 1.5mm hexagonal driver (part
no 29600-095) into the small hole on the detector face and gently lever the
driver outward whilst rotating the detector anti-clockwise.
TimeSaver Diode Base/TimeSaver Diode Base LX
Fire detection systems that function normally even if a detector head has
been removed usually require a diode to be fi tted to the positive connec-
tions of the mounting base.
The TimeSaver base fi tted with a diode is marked with ‘OD’ and the Time-
Saver Diode Base LX is marked with ‘DX’ to distinguish them from standard
bases. The diode is factory-fi tted at the back of the base between the IN+
and OUT+ terminals.
Unlocking the detector
To unlock the detector from the base, insert a 1.5mm hexagonal driver (part
no 29600-095) into the small hole on the detector face and gently lever the
driver outward whilst rotating the detector anti-clockwise.
TimeSaver Diode Base/TimeSaver Diode Base LX
Fire detection systems that function normally even if a detector head has
been removed usually require a diode to be fi tted to the positive connec-
tions of the mounting base.
The TimeSaver base fi tted with a diode is marked with ‘OD’ and the Time-
Saver Diode Base LX is marked with ‘DX’ to distinguish them from standard
bases. The diode is factory-fi tted at the back of the base between the IN+
and OUT+ terminals.
Unlocking the detector
To unlock the detector from the base, insert a 1.5mm hexagonal driver (part
no 29600-095) into the small hole on the detector face and gently lever the
driver outward whilst rotating the detector anti-clockwise.
TimeSaver Diode Base/TimeSaver Diode Base LX
Fire detection systems that function normally even if a detector head has
been removed usually require a diode to be fi tted to the positive connec-
tions of the mounting base.
The TimeSaver base fi tted with a diode is marked with ‘OD’ and the Time-
Saver Diode Base LX is marked with ‘DX’ to distinguish them from standard
bases. The diode is factory-fi tted at the back of the base between the IN+
and OUT+ terminals.
Fig 2
Wiring diagram
LED –
COM –
IN +
OUT +
1
2
3
4
From
control
panel
Screen
(Functional
Earth)
The drawing shows
the connection of a
single remote LED.
To connect more than
one base to a single
remote LED wire up
as shown and common
all associated LED –
terminals.
Fig 2
Wiring diagram
LED –
COM –
IN +
OUT +
1
2
3
4
From
control
panel
Screen
(Functional
Earth)
The drawing shows
the connection of a
single remote LED.
To connect more than
one base to a single
remote LED wire up
as shown and common
all associated LED –
terminals.
Fig 2
Wiring diagram
LED –
COM –
IN +
OUT +
1
2
3
4
From
control
panel
Screen
(Functional
Earth)
The drawing shows
the connection of a
single remote LED.
To connect more than
one base to a single
remote LED wire up
as shown and common
all associated LED –
terminals.
Fig 2
Wiring diagram
LED –
COM –
IN +
OUT +
1
2
3
4
From
control
panel
Screen
(Functional
Earth)
The drawing shows
the connection of a
single remote LED.
To connect more than
one base to a single
remote LED wire up
as shown and common
all associated LED –
terminals.
Fig 3
Diode fi tted to TimeSaver Base
Fig 3
Diode fi tted to TimeSaver Base
Fig 3
Diode fi tted to TimeSaver Base
Fig 3
Diode fi tted to TimeSaver Base
For technical data refer to Product Guide PP2147 held by manufacturer.
0832
For technical data refer to Product Guide PP2147 held by manufacturer.
0832
For technical data refer to Product Guide PP2147 held by manufacturer.
0832
For technical data refer to Product Guide PP2147 held by manufacturer.
0832