SP 6000
19
F.
Press
, display will show before selected time of switch on. Press
continuously to set the switch
off time. Such as set the shutdown time at 13:00:
G.
Press “ / ” to set the target temperature (temperature range 10-49ºC).
H.
By last press to confirm the configuration. Repeat step b-g to set more days.
i.
To cancel the weekly program, press
, “P” light in display will light off. The weekly program will be off.
The heater will work in previous mode.
-
After weekly program is set, press
/
/
/
to check the program of each day and each period..
-
Press “ / ” to check the desired temperature in each program.
-
The switch on periods goes 0-24 hours, you can set the minutes.
-
TIME OFF cannot be less than TIME ON.
-
When TIME ON is the same as TIME OFF, heater will be into standby mode.
Set open window detection (only by remote control).
a.
Press
, heater will enter into working status. Heating for a moment until stable.
b.
Press
by remote control, it will light the logo in display. Display will show “23” as default
temperature. Press “ / ” to set target temperature. During open window detection mode, if room
temperature drops 5-10ºC for 10 minutes, the heater will stop working and enter into standby mode for
30 minutes. If you want to turn it on again press
.
To disconnect open window detection mode press
again and symbol will turn off in display.
Example of display with follow situation: room temperature lower than 23ºC, selected temperature 23ºC,
open window detection mode turn on.
