EX 5000
15
3.
Detach the metal funnel through turn it anticlockwise, get rid of coffee residue inside, then you can clean
it with cleanser, but at last you must rinse with clear water.
4.
Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1.
To make sure your coffee maker operating efficiently, internal piping is cleanly and the peak flavor of
coffee, you should clean away the mineral deposits left every 2-3 months.
2.
Fill the tank with water and softener to the MAX level (the scale of water and softener is 4:1; you can get
more details from the user manual of the softener. Please make sure to use “household softener”.
3.
Perform the process of making coffee without including coffee and expelling steam until all the water in
the tank is exhausted.
4.
Repeat the previous step, filling the tank with water without softener.
TROUBLE SHOOTING
Symptom
Cause
Corrections
Carafe leakage water or water
leaks out from lid of carafe
The carafe is not located
properly
Let centreline of carafe aligns
with leakage opening of brew
basket well.
The level of water in the tank
exceeds the scale of MAX.
The water level in the tank
should be within the scale of
MIN and MAX.
Water leaks from the bottom of
coffee maker.
There is much water in the drip
tray.
Please clean the drip tray.
The coffee maker is malfunction.
Please contact with the
authorized service facility for
repairing.
Water leaks out of outer side of
filter.
There is some coffee powder on
filter edge.
Get rid of them.
Acid (vinegar) taste exists in
Espresso coffee.
No clean correctly after cleaning
mineral deposits.
Follow all steps shown on
“cleaning mineral deposits”.
The coffee powder is stored in a
hot, wet place for a long time.
The coffee powder turns bad.
Please use fresh coffee powder,
or store unused coffee powder
in a cool, dry place. After
opening a package of coffee
powder, reseal it tightly and
store it in a refrigerator to
maintain its freshness.
The coffee maker cannot work
anymore.
The power outlet is not plugged
well.
Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please
contact with the authorized
service facility for repairing.