ENM 2000
3
Eliminación del electrodoméstico viejo.
En base a la Norma europea 2002/96/CE de Residuos de aparatos Eléctricos y Electrónicos (RAEE),
los electrodomésticos viejos no pueden ser arrojados en los contenedores municipales habituales;
tienen que ser recogidos selectivamente para optimizar la recuperación y reciclado de los
componentes y materiales que los constituyen, y reducir el impacto en la salud humana y el
medioambiente. El símbolo del cubo de basura tachado se marca sobre todos los productos para recordar
al consumidor la obligación de separarlos para la recogida selectiva.
El consumidor debe contactar con la autoridad local o con el vendedor para informarse en relación a la
correcta eliminación de su electrodoméstico viejo.
DECLARACIÓN DE CONFORMIDAD: Este dispositivo cumple con los requisitos de la Directiva de Baja
Tensión 2014/35/EU y los requisitos de la directiva de Compatibilidad Electromagnética 2014/30/EU.
ENGLISH
PLUG WITH REMOTE CONTROL – ENM 2000
INSTRUCTION MANUAL
Please read the following instructions carefully before connecting this appliance.
IMPORTANT
-
Do not plug a device if it exceeds 16 Amp.
-
Always make sure the device is properly connected to the device.
-
If you need to clear the device, unplug it from the mains and wipe with a dry cloth.
-
Do not immerse the timer in water or other liquid.
-
Radiators and the like should not be left unattended while running. The manufacturer does not
recommend connecting such devices to the timer.
Description
1.
Remote control ON/OFF transmitter.
2.
Receptor grounding plug.
3.
ON/OFF button with indicator light.
Installation
1.
Take the double-side sticker, stick one side on rear side of
remote control transmitter.
2.
Now look for a suitable place on the wall for transmitter. Ensure it is flat and clean it of any dirt, then
stick firmly transmitter on the wall with double-side sticker on its rear side.
3.
Plug receptor to socket, which should be placed within 40 m of transmitter and switch on.
4.
You just have to plug any electronic appliance in the socket and use remote control to turn on and turn
off.
This plug doesn’t have battery, so that you won’t need to remove transmitter from the wall once installed.
Besides, it doesn’t need tool for installing.
ATTENTION: the remote control needs to be away from a strong electromagnetic environment, or near a
piece of metal.