BV 6575
14
2.
Always wash immediately after use for easier cleaning. Don’t let food dry on the jar assembly as this will
make cleaning difficult.
3.
Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds. And then
empty the jar.
4.
Dismantle all detachable parts. Lift the jar assembly off the motor unit,
To detach the blade assembly by
turning it clockwise from the jar base bottom , and remove the seal ring 2 and blade assembly (see
fig.8). In addition, detach the jar cover seal ring 1 from the jar cover
5.
Rinse the measure cup, lid, seal ring 1, jar unit, seal ring 2 and blade assembly by hands or in a
dishwasher and then dry. They are dishwasher safe components, but the temperature setting shall not
exceed 65
℃
.
6.
Brush the blade clean using warm soapy water, then rinse thoroughly under the tap.
Don’t touch the
sharp blades, handle carefully.
Don’t immerse the blade assembly in water.
Leave to dry upside down
away from children.
7.
Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by rubbing with
non-abrasive cleaner. If liquids spill into the motor unit; first unplug the unit, then wipe with a damp
cloth and dry thoroughly.
CAUTION
1)
Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2)
Do not use rough scouring pads or cleansers on parts or finish.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should
contact their local authority or retailer for information concerning the correct disposal of their old
appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the
requirements of the EMC directive 2014/30/EU.
Fig.8
