BP 5003 A
13
DESCRIPTION
A.
Heating elements
B.
Power knob
C.
Tilt screws
D.
Indicator light
E.
Base
INSTALLATION
-
Maintain a sufficient distance between the appliance and walls and objects. Minimum distances.
-
The device should not be placed immediately below a socket base.
-
The appliance must be installed so that the switches, thermostat and power cable cannot be touched
directly or indirectly by a person in the bath or shower
-
Whenever the appliance is to be installed in a bathroom, it is necessary to maintain the required safety
zone around it.
-
Do not install the appliance so that the heat rays directly bear on walls or adjacent objects.
INSTRUCTIONS FOR USE
In order to pull the appliance on, use the knob.
0= Off
1= 600W
2= 1200W
If you notice while turning on the appliance that there are slight vibrations which then gradually
fade away, don’t become unduly alarmed. This is part of the normal behavior of the appliance.
MAINTENANCE
-
Before undertaking any maintenance operation, disconnect the appliance from the power supply.
-
This appliance does not require any particular maintenance. For cleaning it is recommended to use a soft
moist rag and neutral detergent. Do not use an abrasive cloth or devices which could affect the outward
appearance of the appliance. Check that the parts exposed to the heat rays and the ventilation are free of
dust and dirt.
-
During cleaning, be careful not to touch the quartz heating elements.
-
In case of breakdown and/or poor function of the appliance, disconnect the appliance from the power
supply and contact an authorized service center. Always request the use of original spare p arts.
-
The non-observation of these instructions can compromise the safety of the appliance and render
guaranty invalid.