Orban Optimod-PC 1101, Руководство по эксплуатации, Страница: 64 / 258

2-8
INSTALLATION ORBAN MODEL 1101
the OPTIMOD-PC cards from
either a Telnet/SSH client or
a custom third party applica-
tion. See
OPTIMOD-PC Sys-
tem/Mixer Control API on
page 6-1.
If you do not assign a Ter-
minal Password in this step,
your installation will not be
secure unless
U
SE
L
OCALHOST
O
NLY
F
OR
T
ERMINAL
A
CCESS
is
checked ( step (8.G) on page
2-10).
F) Assign an Administrator
Password to the card by fill-
ing in the
A
DMINISTRATOR
P
ASSWORD
and C
ONFIRM
P
ASSWORD
fields identically.
Do not make the User
and Administrator pass-
words identical.
Be sure to write down and
remember the Administrator
Password because you must
have it to change the card’s
User Password or the Card Name in the future. You may check
R
EMEMBER
A
DMIN
. P
ASSWORD
, but be aware that this will allow anyone with access to
your computer to change the User and Administrator passwords for this
card. If this privilege was used maliciously, it could lock you out of the
card, requiring an inconvenient editing of your computer’s Registry to
remove the unwanted password.
G) Click
S
AVE
to confirm your entries.
H) Repeat steps (B) through (G) for each new card installed in your local com-
puter.
When you re-enter the C
ONNECT
menu, you will now see the cards listed by the
names you have assigned to them, not by their serial numbers.
8. Set up network access for all OPTIMOD-PCs on your computer. (optional)
If you want other computers to be able to access local cards via a TCP/IP network,
you must complete the following steps:
A) If the OPTIMOD-PC application is currently connected to a card, disconnect it
by choosing
D
ISCONNECT
from the
C
ONNECT
menu.
B) Navigate to
T
OOLS
> S
ERVICE
S
ETUP
Figure 2-4: Card & Security Administration