5
EN
• The power plug of the appliance must be compatible with the
mains socket. Never use any adapters or modify the socket in any
other way. Do not use inappropriate or damaged soclets.
• To avoid electrical shock, plug the power cables into properly
grounded electrical outlets. If the device is equipped with a
3-pin power supply cord, do not use adapters that do not have
a grounding element or remove the grounding element from the
plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power
cord of the appliance to mechanical stress or external heat
sources. Damage to the power cord may result in electric shock.
• If the power cord is damaged, disconnect the appliance from the
mains and do not use it again. If the power cord / power cord is
damaged, it must be replaced by the manufacturer, its service
department, or a qualified person to avoid the risk of electric
shock.
• Regularly check and maintain the electrical appliance as well as
the power cable. Disconnect the power plug regularly and clean
it if necessary. Pollution by dust or other substances may cause
disruption of the insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress
of water into the appliance increases the risk of electric shock.
If the power cord is wet or the appliance gets water, disconnect
it immediately from the mains. If the appliance is plugged into a
mains socket and if possible, turn off the power supply before
attempting to disconnect the power supply. If you are pulling wet
wires from a live power source, be very careful.
• If the electrical equipment is installed (connecting) the protective
covers are dismantled, the electrical parts must not be accessible
to the user when the installation is finished.
