Unpacking / Packaging
• Unpack and remove all parts of packaging waste and labels
before putting the device into operation. Keep all packaging
materials in a safe place or keep them out of the reach of
children and inappropriate persons.
There is a risk of serious injury! There is a risk of choking!
Check / Startup
• The appliance is designed for food preparation. Therefore,
clean all parts before putting it into operation according to the
instructions in section „Putting into operation“, respectively.
„Cleaning and maintenance“.
Warning!
• Never immerse the kettle, the base (power stand), the power
cord or its plug into water or other liquids.
• Never clean the device (kettle with base) and the power cord
with the plug in a way that could cause the liquid to flow into
the device. Clean these parts with a slightly moistened cloth
and wipe dry or let it dry. Clean the device only when switched
off is disconnected from mains power and sufficiently cooled.
• We recommend performing both initial and subsequent
regular machine inspections. It is very important that the lid is
well closed and not damaged. No curtains may be damaged.
Do not attempt to interfere with the construction or adjustment
of the component parts in any way.
• Never use the appliance if it is incomplete, damaged, or
any part of it has been damaged during use. If the device is
damaged, have it repaired by a specialist service.
• Do not use the non-original and incomplete parts of the
appliance - the kettle and the appropriate base (power stand)
with the power cord and the plug.
There is a risk of electric shock!
There is a risk of serious injury or life threatening! There is a
risk of damage to equipment or other property damage!
Location / Installation
• Use the device only in places where it is not overturned.
• Only place the appliance on straight, firm and stable pads
- kitchen work desks and furniture parts, suitable for the
location of kitchen utensils.
• Always make sure that the place you want to place the
device has enough space, stability, mechanical strength and
adequate lighting.
7
EN