8
EN
Check/Commissioning
• We recommend performing both initial and subsequent regular product
inspections. Use the device only with accessories and spare parts supplied
and approved by the manufacturer.
• Never use the appliance if it is incomplete, damaged, or if parts or accessories
(eg due to fall) have been damaged during use.
There is a risk of electric shock! There is a risk of serious injury!
• Never clean the device (body with electrical parts) and the power cord with the
plug in a way that could cause the liquid to flow into the device.
• Clean these parts with a damp cloth only and wipe dry or let it dry.
• Only clean the appliance if it is switched off and disconnected from the mains.
Keep the device clean and dry.
Operation/Using/Supervision
Warning!
• Use the appliance only in such a way that there is no danger to
the health of children, vulnerable persons and animals, there are
no risks of damage to the equipment and other material damage.
• Use the device to trim clean, dry, and free hair. Dry your hair first
with a towel.
• Do not use the appliance to trim synthetic hair.
• Do not use hair care equipment to treat animal hair. Also, take
care with respect to possible parasite transmissions and keep
the device clean and hygienic. After each use, always clean the
device thoroughly.
There is a risk of transmission of parasites from animals to
humans and persons!
• Always keep your device under control during use and operation!
• This device is not intended to be operated by a programmer, an
external time switch or a remote control, because there is a risk
of fire when covered or incorrectly positioned.
• Do not use the appliance near easily flammable materials and
objects, curtains, curtains, decorative fabrics, and the like. There
is a danger of fire!
• Make sure that the main switch is set to „OFF“ /“0“ position before
each connection to the mains.
• Do not switch the device on or off by plugging in or pulling out the
power cord from the AC socket.
• Always connect the appliance to mains power supply for normal
use, then turn on the main power switch. When you have finished
using the device, turn off the main switch and then pull out the
power cord from the wall socket.
