5
EN
2. Special safety instructions. Read carefully!
The electrical equipment is designed and manufactured in such a way as to allow safe
operation and use by persons without professional qualifications. Despite all the mea-
sures taken by the manufacturer for safe use, operation and use carry certain residual
risks and the possible dangers associated with them. The following symbols and their
meanings have been used on the device and in the accompanying documentation to
warn of possible dangers:
This symbol alerts users to the fact that the device operates on hazardous
electrical voltage. Do not remove the protective covers on the device. Failure
to observe the safety instructions for the operation and use of the device may
result in:
Danger of electric shock!
Danger of serious injury or death!
This symbol alerts users to the risk of failure to observe the safety instruc-
tions when operating and using the device:
Danger of serious injury or death! Danger of equipment damage or other
property damage!
Tento symbol znamená, že výrobok je vyhotovený s dvojitou izoláciou medzi
nebezpečnými živými časťami (časťami s nebezpečným napätím z napájacej
siete) a časťami, ktoré sú prístupné pri normálnom používaní.
Transport/Carrying
• When transporting and using e.g. trolley take care to avoid tipping the device over.
• Only transport / carry the device after a thorough inspection of the area and the route,
which must be unobstructed.
• Never carry the device while it is in operation. Do not carry the device while it is connec-
ted to the mains.
• Carry the device by firmly grasping the lower edge of the stand or solid parts of your
body with both hands.
• When carrying, make sure that your hands and the device are not wet or slippery. Dan-
ger of serious injury or death!
There is a risk of damaging the device
Unpacking/Packaging
• Unpack the device (and accessories, if any) before putting it into operation and dispose
of all parts of the packaging materials, labels and tags. Keep packaging materials in a
safe place, especially out of the reach of children and incompetent persons, or dispose
of them safely.
• Before commissioning, clean the device according to the instructions in the section
„Commissioning“, resp. „Cleaning and maintenance“.
• Never clean the unit (and the remote control, if equipped) and the power cord with plug
in a way that could cause cleaning fluid to enter the unit.
• Clean these parts only with a slightly damp cloth and wipe dry or allow them to dry.
• Only clean the device when the device is switched off and unplugged.
There is a risk of electric shock!
Danger of electrical short circuit!
!
