13
EN
Assembly accessories and
fi tting to the engine unit
Follow the steps below to set up a food processing appliance.
1.
Place the base on a dry, level and fi rm surface. Do not plug the
power cord into an electrical outlet before fully assembling the
device!
2.
Place the cover with the hole on the container. Insert the cap into
the hole and turn it to the right to lock it.
3.
Press the blender jar onto the base so that it fi ts fi rmly and
correctly on the base. The mixer is ready to use.
Warning:
Follow the procedure below. Otherwise the blender will
not work!
4.
Put the food to be mixed in the container and place the two-
element cover on the container.
Always insert only 1 cup (measuring cup) of food at a time (meat,
vegetables, nuts, etc.). Before processing, cut larger pieces of
food into approx. 2.5 cm cubes.
Do not process more than 1 cup of food at a time!
5.
Plug the power cord into an electrical socket.
6.
For continuous mixing, set the switch to one of the power
positions. For manual mixing, turn the switch to the
P
(PULSE)
position for the required time.
7.
If you add liquids to the container during food processing, pour
them through the neck in the cover.
Note:
The maximum volume of liquid added must not exceed 3
cups. If you need to open the container during processing, switch
off the machine and wait until the rotation of the blades has
stopped. You can add more food through the neck of the cover
without having to open the cover.
Warning!
Before removing the cover from the container, switch off the
appliance and wait until the rotation of the blades has stopped!
8.
When you have fi nished working, unplug the power cord from the
electrical socket.
When opening the container cover, hold the container fi rmly and
pull the cover upwards to release it.
9.
Be careful of the knives when removing food from the container.
Handle knives carefully! They are sharp!
Pull the handle upwards out of the base by grasping the handle.
Wipe off food residue from the container and knives with a rubber
spatula.
