Orava EV-13S, Инструкция по эксплуатации

Страница: 6 / 16

6
EN
• Store the device in a clean and dry place. Do not load the device
during storage.
• Never overload the machine beyond the limits set by the technical
specifications!
• If the device has non-standard features, have it checked by a
specialist workshop.
• If any safety component (mechanical, electrical/electronic) is part
of the device, never disable this part/component! If the safety
component is damaged or not working, do not use the appliance!
• Never underestimate the potential hazards and pay extra caution !!!
Power Supplies/Batteries
Safety instructions for replacing and loading with the power supply -
batteries.
Warning!
• When using electrical/electronic devices that are equipped with a
DC voltage source - such as a battery or accumulator, always follow
important safety instructions and warnings when operating and
handling these sources.
Warning!
• Never charge the batteries!
• Never disassemble the batteries!
• Never heat the batteries or throw them into the fire! Failure to follow the
safety instructions could result in:
Danger of serious injury!
Danger of explosion!
Chemical Danger!
Danger of damage to equipment or other property damage!
Warning!
• The device is equipped with a power source that can be exchanged for
battery users.
• Risk of electric shock, explosion, electrolyte leakage, corrosion in case
of incorrect exchange and handling.
• Dispose of batteries in accordance with applicable regulations and
provisions for disposal of electronic devices.
Warning!
• Always store batteries out of reach of children, inappropriate persons
and pets.
• Carefully keep the batteries in use so that children can not swallow
them and dispose of them as soon as possible. If swallowing occurs,
seek medical advice immediately.
• Use only the same or equivalent type of battery specified by the
manufacturer. Do not use new batteries together with old ones. This
may result in damage to the device.
• Wipe the battery with dry cloth before inserting it into the machine. This
will ensure a better electrical contact.