19
EN
2
Pull out the filter assembly
and empty the contents of
the cartridge.
3
Disassemble the filter assembly by
turning the filter basket counterclockwise
and pulling out the filter basket. Shake the
filter housing itself and shake off the dirt.
Parts and filter can be rinsed with water.
Both parts and filter must dry completely
before reinserting. If necessary, replace the
filter housing with a new one.
4
After cleaning and complete drying, assemble the filter assembly together
in the reverse order of disassembly and place the assembled assembly in
the dirt tank.
5
Insert the filter cartridge into the vacuum cleaner in the same way as
removing it.
Warning!
Before fitting the cartridge, check that the filter is correctly inserted,
protruding from the space, and does not prevent the cartridge from closing
properly.
Cleaning the suction opening
If there is an object clogging the suction opening of the vacuum cleaner,
proceed as follows:
1
Remove the attached accessories.
2
Remove the sucked obstruction from the suction port.
3
Put the accessories back into the vacuum suction opening.
