Dear Customer,
Congratulations on your purchase of the
ORATOR
PA101 speaker. This speaker
incorporates the latest features including Australian approved UHF wireless
microphone technology, MP5 DVD player, MP3 Player, Bluetooth, FM Radio,
80W RMS of power output, rechargeable battery & plenty of connections for input
to and output from the speaker. It is powered by a low voltage power adapter for
maximum safety.
Safety/Warning Notes:
For any service and repair, contact ABI as per the details below. Do
not attempt to remove the amplifier or to replace any parts without
first contacting ABI or an authorised service agent.
To prevent fire or electric shock, do not expose this speaker or the
power supply to rain or moisture.
If you connect to an external battery, ensure the terminal cables are
connected positive to positive & negative to negative, or you will
damage some electronic components & the internal 12V fuse.
To maximise the life of your rechargeable battery, the battery should
be recharged at least every 3 months. If left uncharged, the battery
life may be seriously damaged.
How to Use Bluetooth Function:
1. Turn the speaker on.
2. Press “Mode” (7) button until “Bluetooth” displayed.
3. In Bluetooth setup on your transmitter device (phone, etc), select “BT Speaker”.
4. The speaker will “beep” when the bluetooth connection is successful.
5. You can now start streaming your music.
MP3 Player Operation:
Note there are 2 x MP3 players included. The player in the top right of the
Amplifier panel (8) is recommended and is controlled by controls 7. Note that the
music format MUST be MP3 or the player will not work. The second MP3 player
(26) included in the DVD can also be used, but is controlled via DVD controls
(14).
For any service or operation queries, contact ABI or your local
ORATOR
Dealer.
ABI can be contacted on 02.9938 6866 or [email protected].
Battery Replacement:
The battery is located in the compartment at the bottom of the rear of the
speaker, under the Amplifier panel. Simply press the latch lock to open. The
battery is then easily accessible. When replacing the battery, ensure that the
same battery type is used, & that the positive (red) & negative (black) terminal
connections are correctly replaced.
Specifications of the PA101:
Speaker Unit:
1 x 10” bass + 1 x 3” treble
RMS Output:
80W
Impedance:
8 ohms
Frequency Response:
50Hz - 20 kHz
Separation:
>48 dB
S/N ratio:
> 92 dB
Inputs:
2 x Microphone (6.3mm)
1 x Guitar (6.3mm)
Line In (2 x RCA)
Wireless UHF Microphone (built in receiver)
MP3 (USB or SD)
Bluetooth (built in receiver)
FM radio (built in receiver)
DVD, DVD, SVCD, MP4, WMA, VCD, DVCD, CD,
JPG
Outputs:
Video (Yellow RCA)
Audio (2 x RCA)
Power:
15V 4A
Battery:
12V 7Ah
Wireless Microphone:
UHF, 100 selectable frequencies, PLL,
range 520 - 694 MHz, 32 MHz switching bandwidth,
100kHz channel grid, 30mW RF power output.
Diversity Receiver.
Care of the Speaker/Accessories Management:
We have included a dust cover for use with the PA101. This is designed to cover
the speaker when not in use, to protect the speaker from any dust. Also your
accessories (power adapter, wireless microphone & remote control) can be
stored in the pocket of the cover to ensure the accessories are together with the
speaker.
Moving/Mounting the Speaker:
The PA101 has a pull up handle & wheels for easy transport; a handle for lifting,
& a 35mm mounting socket under the base of the speaker. Tripods stands & wall
mount brackets are available to suit thissocket, for easy speaker mounting.
