Oransi OV200, Руководство пользователя

Страница: 7 / 12

Pre-Filter
The Pre-Filter is built on to the HEPA Filter to capture large particles such as dust.
HEPA Filter
HEPA filter to remove microscopic particles down to 0.3 microns in size such as fine
dust, smoke, pollen, bacteria and mold.
Activated Carbon Filter
The activated carbon filter consists of a vast system of highly absorbent molecular
sized pores to remove gases, light odors and Volatile Organic Compounds (VOCs).
Placement
In order to get better performance in cleaning, it is recommended to place the purifier
on the ground or a stable surface. Since the air is drawn in through the front sides of
the air purifier it can be placed near a wall.
Fan Speed
There are three fan speeds plus Auto and Night Modes. Pressing the fan speed button
will cycle through the fan speeds and Auto Mode.
Night Mode
Cycle through the fan speeds to get to Night Mode. This reduces the fan speed to the
quietest level and turns off the air quality display. The blue lights on the top of the
user interface will remain on but will be dimmed.
Timer
There are 4 timer settings: 1, 2, 4, and 8 hours. The air purifier will turn off after the
set time on the timer.
Kid Lock
Pressing the Timer and Speed buttons at the same time will lock the air purifier in its
current state. To unlock the air purifier, press and hold these two buttons again at the
same time.
A I R P U R I F I E R O V E R V I E W
07