ORANGE TERROR BASS 1000, Руководство пользователя

Страница: 9 / 11

9
TERROR BASS 500/1000
ENGLISH
2. Make sure that the OFF/STBY/ON switch is in the Standby (middle) position for a minute or
two before switching the power switch to the ON position. This will warm up the pre-amp
valves ready for use.
3. INPUT (PASSIVE/ACTIVE BUTTON)
Please set to passive when a passive bass guitar is plugged into the input.
Please set to active when an active bass guitar is plugged into the input.
4. GAIN CONTROL
The gain control adjusts the input gain of the amplifier.
5.
BASS CONTROL
The bass control adjusts the bass response of the amplifier.
6.
MIDDLE CONTROL
The middle control adjusts the mid range response of the amplifier.
7.
TREBLE CONTROL
The treble control adjusts the treble response of the amplifier.
8. DI OUTPUT
The DI output is set at professional line level for a padded mixing desk to a PA.
(An external DI box should still be taken from the actual bass guitar itself in most live
situations so that a signal can still be present in case of amplifier failure )
9. GROUND LIFT BUTTON
Please engage this button if ground hum becomes a problem when hooked up to external
equipment.