Oracle Database Appliance X9-2S/X9-2L
Oracle Database Appliance X9-2-HA
•
Optional Component Installation
•
Safety Precautions When Rackmounting
•
•
Rack Compatibility Requirements
•
Contents of the Shipping Container
•
•
Stabilize the Rack for Installation
•
Installing the Server Into a Rack
•
Optional Component Installation
•
Safety Precautions When Rackmounting
•
•
Rack Compatibility Requirements
•
Contents of the Shipping Pallet
•
•
Verify Component Compatibility
•
•
Stabilize the Rack for Installation
•
•
Installing the Storage Shelves Into a Rack
•
Add a Storage Expansion Shelf to an Existing
System
•
Installing the Server Nodes Into a Rack
Optional Component Installation
Learn about the optional components supported for the various Oracle Database
Appliance models.
Optional memory can be purchased independent of the standard configuration and is
shipped separately. Where possible, optional memory should be installed before you
install the server in a rack.
•
DIMM memory kits:
–
For Oracle Database Appliance X9-2S, you have the option of ordering
memory expansion to 512 GB. Memory kits come in sets of 8 x 32 GB DIMMs.
–
For Oracle Database Appliance X9-2L with 512 GB of base memory:
*
You have the option of ordering memory expansion to 1 TB. Memory kits
come in sets of 8 x 32 GB DIMMs, which means you need two kits (one
for each processor).
*
Or, if you need 2 TB of memory, you can replace your 32 GB DIMMs with
64 GB DIMMs. Memory kits come in sets of 16 x 64 GB DIMMs, which
means you need two kits (one for each processor).
–
For Oracle Database Appliance X9-2-HA with 512 GB of base memory:
*
You have the option of ordering memory expansion to 1 TB per server
node. Memory kits come in sets of 8 x 32 GB DIMMs, which means you
need four kits (two for each server node) for 1 TB. Both server nodes must
have the same amount of memory. Thus, the total memory for the
appliance becomes 2 TB.
*
Or, if you need 2 TB of memory per server node, you can replace your 32
GB DIMMs with 64 GB DIMMs. Memory kits come in sets of 16 x 64 GB
DIMMs, which means you need four kits (two for each server node).
Refer to the Service Manual for instructions on installing memory.
•
Storage drives:
Chapter 4
Optional Component Installation
4-2
