manualshive.com logo in svg

Oracle X7 series, Руководство администратора

Поделиться
Скачать
Oracle X7 series Скачать руководство пользователя страница 66

Assigning System Identification Information

Related Information

■

Configuring Oracle ILOM (

ilomconfig

), 

Oracle Hardware Management Pack Server CLI

Tools User's Guide

 at 

http://www.oracle.com/goto/ohmp/docs

Assigning System Identification Information

System identification information is stored in Oracle ILOM, and includes the following items:

■

Hostname

: The hostname name assigned to the SP. This can be mapped by a DNS server

and used to login to Oracle ILOM.

■

System Identifier

: Additional information about the server.

■

System Contact

: A person to contact for issues with the server.

■

System Location

: A string that describes the physical location of the server.

The following procedures describe how to assign system identification information:

■

“Assign System Identification Information (Oracle ILOM)” on page 66

■

“Assign System Identification Information (Oracle Hardware Management

Pack)” on page 67

Assign System Identification Information (Oracle

ILOM)

Before You Begin

Ensure that you have Admin (a) role privileges in Oracle ILOM.

1.

To assign system identification information from the Oracle ILOM web interface:

a.   

Log in to the Oracle ILOM web interface.

For instructions, see 

“Accessing Oracle ILOM” on page 21

.

b.   

In the navigation pane, click ILOM Administration → Identification.

c.   

Specify one or more of the following system identifiers:

■

SP Hostname

66

Oracle X7 Series Servers Administration Guide • September 2017

Содержание X7 series























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды