manualshive.com logo in svg

Oracle X6 series, Руководство администратора

Поделиться
Скачать
Oracle X6 series Скачать руководство пользователя страница 76

Configure DNS Server Information on the Service Processor (Oracle Hardware Management Pack)

76

Oracle X6 Series Servers Administration Guide • April 2016

Related Information

■

Modifying Default Connectivity Configuration Properties, 

Oracle ILOM Administrator's

Guide for Configuration and Maintenance, Firmware Release 3.2.x

 at 

http://www.oracle.

com/goto/ilom/docs

Configure DNS Server Information on the Service

Processor (Oracle Hardware Management Pack)

1.

Access the operating system command-line.

For more information, see 

“Accessing Oracle Hardware Management Pack” on page 31

.

2.

To enable Oracle ILOM to automatically retrieve DNS information from a DHCP

server on the network, use the following command:

ilomconfig modify dns --autodns enabled --retries 

retries

 --timeout 

timeout

Where 

timeout

 is an integer between 1 and 10, and 

retries

 is an integer between 0 and 4.

3.

If you prefer to disable 

autodns

, use the following command:

ilomconfig modify dns --nameservers 

nameserverlist

 --autodns disabled --retries 

retries

 --

searchpath 

searchpathlist

 --timeout 

timeout

Related Information

■

Configuring Oracle ILOM (

ilomconfig

), 

Oracle Server CLI Tools User's Guide

 at: 

http://

www.oracle.com/goto/ohmp/docs

Содержание X6 series































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды