Oracle Sun Netra X4270, Руководство по обслуживанию

Страница: 41 / 238

Understanding BIOS Booting and Setup
BIOS POST Error Message Error Type Resolution
assurance test
error
Note - Keyboard controller BAT test failed. This error
might indicate a problem with keyboard controller
initialization.
Display memory test failed Video display
error
■ Press F1 to continue.
■ Check the SP event log in ILOM for more details.
CMOS Battery Low CMOS battery
error
■ Press F2 to enter BIOS Setup utility to load system
defaults.
■ Check the SP event log in ILOM for more details.
■ If necessary, replace CMOS battery.
■ CMOS Checksum Bad
■ CMOS Date/Time Not Set CMOS error ■ Press F2 to enter BIOS Setup utility to load system
defaults.
■ Check the SP event log in ILOM for more details.
Password check failed Password check
error
■ Press F1 to continue.
■ Check the SP event log in ILOM for more details.
Note - This type of error indicates that the password
entered does not match the password specified in the
BIOS Setup utility. This condition might occur for both
Supervisor and User password verification.
Keyboard/Interface Error Keyboard
controller error
■ Press F1 to continue.
■ Check the SP event log in ILOM for more details.
Note - This type of error indicates that the Keyboard
Controller failure. This error might indicate a problem
with system hardware.
S.M.A.R.T error on the drive S.M.A.R.T
device error
■ Press F1 to continue.
■ Check the SP event log in ILOM for more details.
Note - Self-Monitoring, Analysis, and Reporting
Technology failure messages might indicate the need to
replace the storage device.
Related Information
■
“Default BIOS POST Events” on page 38
■
“BIOS POST Memory Testing Process” on page 41
BIOS POST Memory Testing Process
The BIOS POST memory testing is performed as follows:
1. The first megabyte of DRAM is tested by the BIOS before the BIOS code is copied from
ROM to DRAM.
Using the BIOS Setup Utility 41